核心功能與定位

系統配置與編程：支持通過工程軟件對控制系統的硬件參數、控制邏輯、工藝算法等進行配置和編寫，實現系統初始化設置。

數據監控與調試：實時采集控制系統運行數據（如模塊狀態、輸入輸出信號值），便于工程師進行系統調試、故障診斷和性能優化。

程序上傳與下載：負責將編寫好的控制程序從工程師站傳輸至控制系統，或從系統中讀取程序備份，確保程序管理的安全性。

兼容性銜接：兼容 Advant 系統內部各模塊（如 I/O 模塊、處理器模塊）的通信協議，保障系統整體數據傳輸?shù)囊恢滦浴?/p>

接口配置
 

- 通信接口：1 個 MB300 接口（用于與系統內部模塊互聯）、1 個 RS-232 串行接口（用于連接工程師站或外部調試設備）
- 總線支持：適配 32 位 33MHz PCI 總線或 100/133MHz PCI-X 總線，兼容工業標準總線架構

存儲與處理

- 內存容量：8Mbyte（滿足基礎控制程序、配置文件及臨時數據存儲需求）
- 數據傳輸速率：匹配 PCI 總線頻率，確保高效數據交互

電源規格

- 工作電壓：24V DC（工業設備常用低壓供電，穩定性高）
- 功耗：典型工作狀態下功耗較低，適配系統整體電源配置

環境適應性

- 工作溫度：0°C ~ 70°C（滿足工業現場控制柜內安裝環境要求）
- 濕度范圍：5% ~ 95%（非冷凝，防止內部電路受潮）
- 抗干擾性：具備電磁兼容設計，抵御工業環境中的電磁干擾

機械參數

- 尺寸：約 15.2cm×5.1cm×35.6cm（緊湊設計，適配標準工業機架安裝）

- 重量：約 0.35kg（輕量化，便于安裝與維護）

Core Functions & Positioning

System Configuration and Programming – Supports configuring and writing hardware parameters, control logic, process algorithms, etc., via engineering software to achieve system initialization.

Data Monitoring and Debugging – Collects control system operating data (module status, input/output signal values) in real time to aid engineers in debugging, fault diagnosis, and performance optimization.

Program Upload and Download – Transfers control programs from the engineer station to the control system, or reads program backups from the system to ensure secure program management.

Compatibility Connection – Compatible with communication protocols of various Advant system modules (I/O modules, processor modules), ensuring consistent system-wide data transmission.
 

Category-Specific Specifications

 

Category	Specification
Interface Configuration	– Communication Interfaces: 1 × MB300 interface (for interconnection with internal system modules); 1 × RS-232 serial interface (for engineer stations or external debugging devices) – Bus Support: Compatible with 32-bit 33 MHz PCI bus or 100/133 MHz PCI-X bus, meeting industrial standard bus architecture
Storage & Processing	– Memory Capacity: 8 Mbyte (sufficient for basic control programs, configuration files, and temporary data) – Data Transmission Rate: Matches PCI/PCI-X bus frequency for efficient data exchange
Power Specification	– Operating Voltage: 24 V DC (commonly used low-voltage industrial supply, high stability) – Power Consumption: Low power consumption under typical operating conditions, suitable for system-wide power budgets
Environmental Adaptability	– Operating Temperature: 0 °C to +70 °C (suitable for installation in industrial control cabinets) – Humidity Range: 5 % to 95 % RH, non-condensing (prevents internal circuit moisture) – Anti-Interference: Electromagnetic compatibility (EMC) design resists industrial electromagnetic interference
Mechanical Parameters	– Dimensions: Approx. 15.2 cm × 5.1 cm × 35.6 cm (compact design, compatible with standard industrial rack installation) – Weight: Approx. 0.35 kg (lightweight, easy to install and maintain)